Installing new shingles to fix a leaky roof (Ellsworth, IL)

It's not as daunting as you would think to replace the shingles on an ancient roof. While the time, effort, and preparation involved in this project are not small, we will provide all of the necessary information to help you complete it successfully.

Executive Summary

You will need to have a hammer, screws, prybar, utility knife and roofing felt paper. Also, a caulk gun, wire brush and putty knife are all necessary. To make this job a success, you will need someone to lend a hand. Let's get right in here.

First, remove all broken shingles.

Grab your screwdriver, hammer, and get out the screwdriver to rip those roof tiles. You should not damage the beautiful shingles around the edges. The wire brush can be used to clean up the damage shingles.

To proceed to step 2, (blog post) a replacement shelle must be cut.

Use the utility knife to trim down one of the new shingles you bought. It's important to replace a shingle with one of the identical dimensions.

Thirdly, nail Bloomington top roofing contractor the new shingle into place.

You must immediately place a new shingle. Four nails should be attached to the new replacement, one in each corner. Never forget to put some distance between each nail.

Replace all shingles by repeating Steps 1-3 until the job is done.

Once you have fixed any leaks or replaced missing shingles, it is time to give your roof some TLC with routine maintenance. This includes cleaning out gutters, inspecting for nails and cutting back branches that could be touching the roof.

Congratulations! You should now have a functional roof that covers your head. You must maintain your roof's integrity for many years. This includes checking for missing nails, cleaning out gutters, and making sure that the gutters are clear.